Evaluation of Swallowing Function in Relation to Oropharyngeal Dysphagia in Patients with Operated Unilateral Cleft Lip and Palate.

OBJECTIVE: To determine the occurrence of oropharyngeal dysphagia (OD) signs and symptoms in patients with operated unilateral cleft lip and palate (CLP). MATERIALS AND METHODS: This prospective study was conducted on 15 adolescents with operated unilateral CLP (CLP group) and 15 non-cleft volunteers (control group). Initially, the Eating Assessment Tool-10 (EAT-10) questionnaire was administered to subjects. OD signs and symptoms such as coughing, the sensation of choking, globus sensation, the need to clear the throat, nasal regurgitation, difficulties of bolus control multiple swallowing were evaluated by patient complaints and physical examination of swallowing function. Also, the Functional Outcome Swallowing Scale was used to determine the severity of the OD. Fiberoptic endoscopic evaluation of swallowing (FEES) with water, yogurt, and crackers was performed. RESULTS: The prevalence of OD signs and symptoms based on patient complaints and physical examination of swallowing was low (range, 6.7 to 26.7%), and nonsignificant differences were observed between the groups for these parameters as well as for EAT-10 scores. According to the Functional Outcome Swallowing Scale findings, 11 of 15 patients with CLP were asymptomatic. Fiberoptic endoscopic evaluation of swallowing indicated that post-swallow pharyngeal wall residues with yogurt were significant in the CLP group with a prevalence of 53% ( P < 0.05), whereas differences between the groups in terms of cracker and water residues were nonsignificant ( P > 0.05). CONCLUSION: OD in patients with repaired CLP was manifested mainly in the form of pharyngeal residue. However, it did not appear to cause significant increases in patient complaints compared with healthy individuals.

Evaluation of swallowing in transverse maxillary deficiency patients before and after rapid maxillary expansion.

OBJECTIVES: To evaluate swallowing function in relation to oropharyngeal dysphagia (OD) in adolescents who had transverse maxillary deficiency with posterior crossbite and high-arched palate, before, and after rapid maxillary expansion (RME). MATERIALS AND METHODS: Twenty patients (mean age: 13.0 ± 3.1) with bilateral posterior crossbite and high-arched palate (RME group: RMEG) and 20 volunteers (mean age: 13.4 ± 2.6) with Class I crowding without posterior crossbite or high-arched palate (control group: CG) were recruited. OD signs and symptoms were evaluated using the Eating Assessment Tool-10 (EAT-10) questionnaire, patient complaints, and physical examination of swallowing function before (T1) and 7 months after (T2) RME. Additionally, fiberoptic endoscopic evaluation of swallowing (FEES) with water, yogurt, and cracker was performed. In CG, evaluation of swallowing was performed only once, corresponding to T1 of RMEG. RESULTS: Prevalence of OD signs and symptoms based on patient complaints and physical examination of swallowing was low (5%-15%), and nonsignificant differences were observed between CG and RMEG at T1 for these parameters as well as for EAT-10 scores. Total post-swallow pharyngeal residue with yogurt was significantly different between CG and RMEG at T1, with a prevalence of 60% in RMEG (P < .05). There was no significant difference regarding residue with yogurt between T1 and T2 in RMEG (P > .05). CONCLUSION: Patients with a maxillary transverse deficiency were affected by pharyngeal residue as indicated by FEES, but it did not appear to improve in short-term follow-up in patients treated with RME.

Comparison of 2 different wear protocols of vacuum-formed retainers with respect to the conventional parameters and 3-dimensional superimpositional analysis.

INTRODUCTION: This study aimed to compare the effectiveness of 2 different wear protocols of vacuum-formed retainers (VFR) in terms of angular and linear displacement of teeth using 3-dimensional (3D) superimpositional analysis and conventional model parameters. METHODS: The study was conducted on 2 groups, each consisting of 17 patients randomly assigned to the part-time group or full-time group of VFR wearing after a nonextraction treatment. While conventional model measurements were assessed on 3D dental casts, 3D tooth movements were evaluated by digitally superimposed scans of casts acquired at 4-time points (debonding and 1, 3, and 6 months after debonding). Regarding conventional parameters, the difference between time-dependent changes among the groups was tested using the nonparametric Brunner-Langer and parametric linear mixed models. Considering 3D measurements, comparisons of groups were made using the Student t tests. RESULTS: There were no significant intergroup differences regarding conventional model parameters at any time (P >0.05). Significant intergroup differences were observed regarding angular and linear relapses in the labiolingual direction for maxillary and mandibular incisors, as well as the rotational relapses for maxillary left canine and mandibular right lateral incisor, which were greater in the part-time group in the first month and at the end of 6 months (P <0.05). CONCLUSIONS: Conventional model parameters appear to play a debatable role in evaluating the effectiveness of a retainer wear regimen. Three-dimensional analysis of tooth movements revealed that part-time VFR wear was less effective in retaining labiolingual and rotational tooth movements for the first month after debonding.

Three-dimensional digital evaluation of tooth symmetry and volume in patients with missing and peg-shaped maxillary lateral incisors.

INTRODUCTION: This study aimed to evaluate the 3-dimensional tooth crown symmetry and the crown volumes of maxillary and mandibular teeth in patients with unilateral or bilateral missing or peg-shaped maxillary lateral incisors. METHODS: Six groups were established for the possible clinical variations in patients with unilateral missing or peg-shaped maxillary lateral incisors, bilateral presence of these tooth anomalies, and a control group (CG) with normal lateral incisors. The study was conducted on digital dental models of 132 patients. The morphologic symmetry of the antimere teeth was investigated using 3-dimensional deviation analysis. Volumes of contralateral teeth were compared within and among groups for the maxilla and mandible. Furthermore, volumes of teeth were compared in missing and peg-shaped quadrants and quadrants of CG. Intergroup differences were tested using one-way analysis of variance and Kruskal-Wallis tests, whereas paired t and Wilcoxon tests were used for parametric and nonparametric variables, respectively, for intragroup comparisons. RESULTS: Significant deviations in symmetry of antimere teeth were not detected (P >0.05). The volumes of mandibular central and lateral incisors in missing or peg-shaped lateral incisor groups were smaller than in the CG (P <0.05). Per quadrant analysis, volumes of the maxillary central incisor and mandibular central incisors, canines, and first molars in quadrants with missing or peg-shaped lateral incisors were smaller than in the control quadrants (P <0.05). CONCLUSIONS: Neither unilateral nor bilateral presence of missing or peg-shaped maxillary lateral incisors affected the morphologic symmetry of antimere teeth but did affect tooth volume, especially in the mandibular arch.

Bond strength of metal brackets to feldspathic ceramic treated with different surface conditioning methods: an in vitro study.

PURPOSE: To compare MEP which is originally manufactured for increasing bond strength between organic resins and ceramic with conventional surface treatment methods in preparation of leucite-reinforced FC surfaces regarding shear bond strength (SBS) of stainless steel brackets and the mode of bond failure. MATERIALS AND METHODS: Forty specimens that were fabricated from FC material and glazed were randomly assigned to four surface conditioning methods: (1) CoJet Sand; (2) MEP; (3) HF acid etching followed by silane coupling agent; (4) Diamond bur followed by silane coupling agent. The SBS was determined using universal testing machine. Bond failure sites were classified according to Adhesive Remnant Index (ARI). RESULTS: No statistically significant difference (p less than 0.05) was found in SBS between the groups while significant intergroup differences were detected concerning ARI scores (p less than 0.001). Group 1 had ARI score 1 and 2 indicating mode of failure at the adhesive interface with greater percentage of the adhesive left on bracket base. The other groups had higher frequency of ARI score 3 and 2. The quantity of the ARI retained on the ceramic surface was highest in Group 3, followed by Group 4 and Group 2. CONCLUSION: MEP can be a suitable alternative for bonding metal brackets to FC surface.

Using Virtual Technology for Fear of Medical Procedures: A Systematic Review of the Effectiveness of Virtual Reality-Based Interventions.

BACKGROUND: Innovations in virtual reality (VR) technologies have improved the adaptability of its use in therapeutic settings, and VR has shown to be a promising treatment for fear of medical procedures, with research increasing in this area in recent years. PURPOSE: This review aims to collate evidence for the impact of VR on fear of medical procedures. METHODS: CENTRAL (Cochrane), MEDLINE, EMBASE, and PsychINFO databases were searched up to October 2020. A mix of experimental and case-control studies were included for review, which evaluated the effectiveness of VR for fear, anxiety, and pain of medical procedures for people with needle phobia, dental phobia, claustrophobia of medical scans, and burn wound care anxiety. Risk of bias (RoB) was assessed by Cochrane and ROBINS-I tools. RESULTS: Twenty-eight studies were selected. Some studies included mixed participant groups of young people adults. The interventions varied, with VR used for distraction, hypnosis, or exposure. These were shown to be effective for reducing fear of medical procedures. However, effectiveness for blood-injection-injury phobias and burn wound care patients was unclear. CONCLUSIONS: Evidence on the effectiveness of VR suggests that it does decrease fear of medical procedures in some situations. However, the RoB assessment illustrated a poor quality of studies across those included in this review, limiting the ability to draw firm general conclusions from the study findings. There is a need for further research exploring the use of VR technologies in the management of anxiety in physical health care settings.

Cleft Lip and Palate YouTube Videos: Content Usefulness and Sentiment Analysis.

OBJECTIVE: This study aimed to describe the content of YouTube videos about cleft lip and palate (CLP) and to describe the sentiment analysis of related comments. DESIGN: Retrospective, YouTube video, and sentiment analysis. METHODS: YouTube videos (N = 112) about CLP were examined, including demographics and ratings of quality and usefulness. Comments on CLP (N = 205) were classified by content, and measured from negative (-5) to positive (+5) with a sentiment analysis program. RESULTS: Videos were uploaded most often by universities and hospitals (25%) and health information sites (22%). Most videos were educational (49.1%) or described patient experiences (48.2%). The most frequent video topics were terminology, CLP treatment, and prenatal diagnosis information. Based on the comprehensiveness of CLP topics covered, videos were generally rated by authors as moderately useful (31.5%) or very useful (35.7%). Comments were mostly made by people with CLP (79%), and the median sentiment scores were +3, and -2 for positive and negative sentiments, respectively. General content categories were positive comments (24.8%), provided information about themselves (24.4%), negative comments (19.5%), comments on usefulness of video (17.6%), or advice (9.3%). While 36.1% of comments noted no difficulties, the remaining comments included difficulties with surgery pain (13.2%), psychological state (12.2%), embarrassment (11.7%), physical appearance (10.2%), long term therapy (9.8%), and speech problems (6.8%). CONCLUSIONS: Although useful and educational YouTube videos were available, the variability of content quality suggests that caution be used in relying on videos for information and that experts in CLP treatment should be consulted.

Comparison of 2 treatment protocols using fixed functional appliances in Class II malocclusion: Treatment results and stability.

INTRODUCTION: The objective of this research was to compare the 2 treatment protocols including a functional mandibular advancer (FMA; Forestadent, Pforzheim, Germany) followed by multibracket appliances (MBAs) vs a Forsus device (3M Unitek, Monrovia, Calif) in combination with MBA concerning treatment outcomes and posttreatment stability. METHODS: This study was conducted using lateral cephalograms of patients who were treated with MBA, which was used either after an FMA or concurrently with a Forsus device, and of patients who had untreated Class II malocclusion (control group). Each group consisted of 19 subjects in cervical stage 2 or cervical stage 3 stages according to the cervical vertebral maturation index. Cephalograms were taken for the treated groups at T1 (pretreatment), T2 (completion of the MBA treatment), and T3 (at least 2 years after T2). RESULTS: Significant intergroup differences at the T1-T2 period were observed in favor of the FMA concerning mandibular advancement, intermaxillary relationship, and mandibular elongation. With Forsus treatment, restrained maxillary growth and a slightly improved intermaxillary relationship rebounded after treatment (P <0.05). At the end of treatment, mandibular incisor protrusion and occlusal plane rotation were greater in the Forsus group than in the FMA group (P <0.05), and maxillary incisor retroclination was significant in the Forsus group. During the posttreatment period, although no significant changes were present in the incisors' inclination, relapses of the T1-T2 improvements in overjet and overbite and the recidive of the occlusal plane rotation were significantly higher in the Forsus group. CONCLUSIONS: Treatment protocol including an FMA was found to be more effective with mandibular skeletal effects and was more stable with a lesser degree of relapse in overjet and overbite than the Forsus protocol.

Root resorption due to orthodontic treatment using self-ligating and conventional brackets : A cone-beam computed tomography study.

OBJECTIVES: Purpose of the present study was to compare external root resorption (ERR) volumetrically in maxillary incisors induced by orthodontic treatment using self-ligating brackets (Damon Q, DQ) or conventional brackets (Titanium Orthos, TO) with the help of cone-beam computed tomography (CBCT). PATIENTS AND METHODS: A sample of 32 subjects, with Angle Class I malocclusion and anterior crowding of 4-10 mm, was divided randomly into two groups: a DQ group, in which self-ligating DQ brackets with Damon archwires were used; and a TO group, in which conventional TO brackets with large Orthos archwires were applied. The study was conducted using CBCT scans taken before (T1), and near the end (9 months after the initiation of treatment; T2) of the orthodontic treatment. The extent of ERR was determined volumetrically using Mimics software. Changes in root volume were evaluated by repeated-measures analysis of variance as well as by paired and independent t-tests. RESULTS: While significant differences were found between T1 and T2 for root volume in both groups (p < 0.05), there was no difference between the groups regarding the amount (mm3 or relative change) of ERR (p > 0.05). Maxillary central and lateral incisors showed similar volume loss (p > 0.05). Furthermore, the TO group showed a higher prevalence of palatinal and proximal slanted RR compared with the DQ group (p < 0.05). CONCLUSIONS: It is not possible to suggest superiority of one bracket system over the other only considering root resorption pattern or amount. Higher incidence of slanted RR found in patients treated with the TO system warrants further research to identify possible specific causes.

Modifications in Presurgical Nasoalveolar Molding Treatment of Bilateral Cleft Lip and Palate Patients With Severely Malpositioned Premaxillae.

OBJECTIVE: The aim of this study was to evaluate a modified presurgical nasoalveolar molding (PNAM) treatment for patients with bilateral cleft lip and palate (BCLP) with severely malpositioned premaxillae. SETTING: This study was conducted at the Faculty of Dentistry, Department of Orthodontics, Ege University, Bornova, Izmir, Turkey. METHOD: Retention arms were manufactured using a mold that we developed, and prefabricated retraction apparatuses were applied to the plaster model obtained from the patient. During the acrylic curing process, the flanges of the appliances were elongated into the sulcus without including the premaxilla. The premaxilla was aligned with the midline with an elastic band system, and the lip hanger was constructed with 0.023-in stainless steel wire. Elastic bands were stretched between the retraction apparatuses and the lip hanger based on the desired force. Nasal stents were added to the retention arms when the cleft width was reduced to less than 6 mm. CONCLUSION: The modified PNAM treatment enabled faster derotation of the premaxilla and earlier initiation of retraction. The prefabricated retraction apparatus and retention arm provided efficient PNAM for patients with BCLP.

The effects of maxillary expansion on the soft tissue facial profile.

PURPOSE: The aims of this retrospective study were to evaluate the possible changes in soft tissue facial profile induced by orthopedic rapid maxillary expansion (RME) and surgically assisted rapid maxillary expansion (SARME), and to correlate them with the underlying hard tissue alterations. MATERIALS AND METHODS: 16 patients who received bone borne SARME and 25 patients who were subjected to RME using metal cast splint hyrax appliance were analyzed retrospectively. This research was conducted on lateral cephalometric radiographs taken on 2 occasions: before expansion (T1) and at the beginning of any further orthodontic treatment (T2). Investigated lateral cephalometric parameters consisted of Holdaway soft tissue measurements with some supplementary soft tissue, skeletal and dental assessments. RESULTS: The acquisition of T2 cephalograms which conforms to the initiation of further orthodontic treatment corresponded to 83.25±3.51 days for SARME and 85.68±4.37 days for RME after the expansion was completed. The only significant change in soft tissue profile of the SARME group was a decrease in upper lip thickness (p<0.05), whereas in the RME group, decrease in soft tissue facial profile angle and increase in H angle were found to be statistically significant (p<0.05 for each). For the RME group, the changes in soft tissue facial profile angle and H angle correlated only with the changes in SNB angle (p<0.05). CONCLUSION: While bone-borne SARME did not seem to possess the potential to alter soft tissue profile, tooth-borne RME caused a more convex soft tissue profile related to a reduction in SNB.

Evaluation of mandibular hard and soft tissues in cleft patients.

PURPOSE: The aim of this study was to compare the mandibular hard and soft tissue measurements of unilateral and bilateral cleft lip and palate patients with non-cleft individuals. MATERIALS AND METHODS: The study sample comprised of lateral cephalograms of 45 subjects. Sample included 15 non-cleft (NC), 15 unilateral cleft lip and palate (UCLP) and 15 bilateral cleft lip and palate (BCLP) cases whose age were between 15 to 17. 1 angular 13 linear measurements were carried out using Arnett and Gunson soft tissue cephalometric analysis and 4 angular measurements were calculated with Steiner Analysis. RESULTS: Mandibular incisor inclinations relative to the occlusal plane (Md1-Md OP) were significantly greater and mandibular incisor projections (Md1-TVL) were significantly retrusive in cleft subjects (p<0.05). Projection values pertaining to lower lip anterior (LLA-TVL), soft tissue B point (B'-TVL), and soft tissue pogonion (Pog'-TVL) were significantly deficient as well in cleft patients (p<0.05). Sagittal position of the maxilla (SNA) (p<0.001) and intermaxillary relation of the jaws (ANB) were significantly deficient in UCLP subjects (p<0.05) and BCLP individuals (p<0.01). LLA-TVL and B'-TVL correlated with SNB in cleft patients (p<0.05). CONCLUSION: Decreased lower lip and chin projection values suggest that mandibular region of cleft patients should be taken into account in forming the treatment plan to improve the esthetic outcome of orthodontic and plastic surgery interventions.

Comparison of stepwise vs single-step advancement with the Functional Mandibular Advancer in Class II division 1 treatment.

OBJECTIVE: To compare two groups of subjects at the peak of the pubertal growth period treated with the Functional Mandibular Advancer (FMA; Forestadent, Pforzheim, Germany) appliance using either single-step or stepwise mandibular advancement. MATERIALS AND METHODS: This study was conducted on 34 Class II division 1 malocclusion subjects at or just before the peak phase of pubertal growth as assessed by hand-wrist radiographs. Subjects were assigned to two groups of mandibular advancement, using matched randomization. Both groups were treated with the FMA. While the mandible was advanced to a super Class I molar relation in the single-step advancement group (SSG), patients in the stepwise mandibular advancement group (SWG) had a 4-mm initial bite advancement and subsequent 2-mm advancements at bimonthly intervals. The material consisted of lateral cephalograms taken before treatment and after 10 months of FMA treatment. Data were analyzed by means paired t-tests and an independent t-test. RESULTS: There were statistically significant changes in SNB, Pg horizontal, ANB, Co-Gn, and Co-Go measurements in both groups (P < .001); these changes were greater in the SWG with the exception of Co-Go (P < .05). While significant differences were found in U1-SN, IMPA, L6 horizontal, overjet, and overbite appraisals in each group (P < .001), these changes were comparable (P > .05). CONCLUSION: Because of the higher rates of sagittal mandibular skeletal changes, FMA using stepwise advancement of the mandible might be the appliance of choice for treating Class II division 1 malocclusions.

Comparative Evaluation of the Pharyngeal Airways and Related Soft Tissues of Unilateral and Bilateral Cleft Lip and Palate Patients With the Noncleft Individuals.

AIM: This study is a comparison of pharyngeal airways and associated soft tissues of unilateral and bilateral cleft lip and palate patients with the noncleft individuals. MATERIALS AND METHODS: Twenty-four unilateral cleft lip and palate patients (UCLP), 21 bilateral cleft lip and palate patients (BCLP), and 26 noncleft patients (NC) between ages 15 to 17 were included in the study. Eleven linear, 1 angular, and 1 proportional measurements were carried out on pretreatment lateral cephalometric head films of these individuals. RESULTS: The nasopharyngeal depths were markedly reduced in BCLP when compared with the NC (P < .001) and UCLP (P < .01) with a significant difference (P < .01) also among UCLP and NC. Minimum space behind the tongue concerning BCLP and UCLP were significantly lower compared to the NC (P < .001 and P < .01, respectively). In pairwise comparison among the clefts, BCLP showed significant (P < .05) narrowing of this distance. Tongue heights and velar lengths were significantly (P < .001) lower in cleft groups compared to the controls. Similarly, the hyoid bone was positioned in a significantly (P < .01) anterior and inferior direction in cleft patients. Comparison of the mean ratio of velar length to nasopharyngeal depth of the three groups revealed significant (P < .001) inadequacies in cleft patients with significantly (P < .05) more severely reduced values in BCLP. CONCLUSION: Pharyngeal airways and involved soft tissues of cleft patients show serious inadequacies compared to controls, with significant diversities among cleft types pertaining to some of the parameters investigated. It should be kept in mind that these variations can influence function in terms of respiration and phonation.

Class II subdivision treatment with the Forsus Fatigue Resistant Device vs intermaxillary elastics.

OBJECTIVE: To compare the effectiveness of comprehensive fixed appliance treatments implemented in combination with Forsus or intermaxillary elastics in Class II subdivision subjects. MATERIALS AND METHODS: Twenty-eight Class II subdivision patients were allocated to two groups using matched randomization: Forsus group (mean age, 14.19 ± 1.02 years) and elastics group (mean age, 13.75 ± 1.16 years). Patients received fixed appliance therapy in combination with either Forsus or intermaxillary elastics. The study was conducted on lateral cephalograms and digital models acquired before orthodontic treatment and 10-12 weeks after the fixed appliances were removed. RESULTS: The treatment phase comprising the use of Forsus (4.53 ± 0.91 months) was significantly shorter compared with elastics application (6.85 ± 1.08 months). This was also true for comparing duration of overall comprehensive treatment in both groups. Extrusion and palatal tipping of maxillary incisors and clockwise rotation of the occlusal plane were greater in the elastics group (P < .05). The mandibular incisors were proclined in both groups (P < .001), but no significant difference was observed between groups (P > .05). The mandibular incisors showed intrusion in the Forsus group and extrusion in the elastics group; the difference between groups was significant (P < .05). Overbite was decreased in both groups (P < .001) in similar amounts. Improvement in overjet, mandibular midline deviation, and correction of molar relationship on the Class II side were greater in the Forsus group (P < .05). CONCLUSION: Forsus is more effective for correcting Class II subdivision malocclusion in a shorter treatment period with minimal patient compliance required.

Upper airway changes following single-step or stepwise advancement using the Functional Mandibular Advancer.

OBJECTIVES: Purpose of the present study was to determine and compare possible changes in the dimensions of the pharyngeal airway, morphology of the soft palate, and position of the tongue and hyoid bone after single-step or stepwise mandibular advancement using the Functional Mandibular Advancer (FMA). PATIENTS AND METHODS: The sample included 51 peak-pubertal Class II subjects. In all, 34 patients were allocated to two groups using matched randomization: a single-step mandibular advancement group (SSG) and a stepwise mandibular advancement group (SWG). Both groups were treated with FMA followed by fixed appliance therapy; the remaining 17 subjects who underwent only fixed appliance therapy constituted the control group (CG). The study was conducted using pre- and posttreatment lateral cephalometric radiographs. Data were analyzed by paired t test, one-way analysis of variance, and Pearson's correlation coefficient. RESULT: In the SWG and SSG, although increases in nasopharyngeal airway dimensions were not significant compared with those in the CG, enlargements in the oropharyngeal airway dimensions at the level of the soft palate tip and behind the tongue, and decreases in soft palate angulation, were significant. Tongue height increased significantly only in the SWG. Compared with the CG, while forward movement of the hyoid was more prominent in SSG and SWG, the change in the vertical movement of the hyoid was not significant. No significant difference between SWG and SSG was observed in pharyngeal airway, soft palate, tongue or hyoid measurements. CONCLUSIONS: The mode of mandibular advancement in FMA treatment did not significantly affect changes in the pharyngeal airway, soft palate, tongue, and hyoid bone.

Three-dimensional evaluation of morphologic tooth symmetry in various malocclusions.

INTRODUCTION: The aim of this study was to evaluate the morphologic symmetry of the maxillary and mandibular teeth between the left and right quadrants in 3 dimensions using advanced engineering software. METHODS: The total sample comprised 120 dental casts of 60 patients with dental and skeletal Class I, Class II, and Class III malocclusions. They were divided into 3 groups of 40 dental casts (20 maxillary, 20 mandibular) belonging to 20 patients. The dental casts were digitized with an intraoral 3-dimensional scanner (TRIOS; 3Shape, Copenhagen, Denmark). Segmentation and superimposition procedures were carried out using Rapidform software (Inus Technology, Seoul, Korea). Teeth in the left and right quadrants (except for the second molars) in both jaws were superimposed using 3-point registration followed by surface-based registration; 3-Matic software (Materialise, Leuven, Belgium) was used for deviation analysis. RESULTS: The maximum mean deviations observed in the positive and negative directions were 0.14 ± 0.10 mm in the maxilla (for the Class I group) and 0.16 ± 0.09 mm for the Class III group. The differences of the maximum deviation amounts among the malocclusion groups were 0.47 ± 0.08 mm in negative direction in the maxillary teeth and 0.79 ± 0.17 mm in the mandibular arch. CONCLUSIONS: In the 3 malocclusion groups investigated, morphologic deviations were low and clinically insignificant. Symmetry of tooth morphology did not differ among Class I, Class II, and Class III malocclusions.

Comparison of anterior and posterior mini-implant-assisted maxillary incisor intrusion: Root resorption and treatment efficiency.

OBJECTIVE: To compare, through cone-beam computed tomography (CBCT), the root resorption and treatment efficiency of two different mini-implant-assisted modalities in intruding the maxillary incisors. MATERIALS AND METHODS: Thirty-two adults who had deep bite and elongated maxillary incisors were randomly allocated to two groups: anterior mini-implant group (AMG) and posterior mini-implant group (PMG). In the AMG, approximately 40 g of force was applied per side with elastic chains from mini-implants placed between the lateral incisors and canines and in the PMG, with beta-titanium wires from mini-implants placed between the second premolars and first molars. This study was conducted on CBCT scans taken before intrusion and after 4 months of intrusion. Data were analyzed by means of a paired t-test, independent t-test, and Pearson's correlation test. RESULTS: One patient was excluded from the AMG due to mini-implant loosening. While the incisors showed a significant reduction in length and volume, this amount was greater in the AMG, especially in the central incisors (P < .05). Together with the mean intrusion rates of 0.62 and 0.39 mm/mo in the AMG and PMG respectively, the center of resistance of the incisors showed distal movement with labial tipping; these changes were greater in the PMG (P < .001). Volumetric root resorption was correlated with the amount of intrusion (P < .05). CONCLUSIONS: Intrusion anchoring from posterior mini-implants is preferred in cases of upright incisors, as the use of such mechanics directs the roots into the spongiosa where they undergo less root resorption and more labial tipping.

Survey on Retention Protocols Among Turkish Orthodontists.

OBJECTIVE: The purpose of this study was to identify general retention protocols practiced by Turkish orthodontist and to compare the results obtained with those of similar studies in Western countries. METHODS: The Web-based survey consisted of 29 questions: 3 to identify the demographic characteristics of the participants and 26 to examine how orthodontists manage the retention phase. Data was interpreted by descriptive statistical methods such as the median test, the Mann-Whitney U-test and logistic regression analysis. RESULTS: The survey return rate was 73.8%. Pretreatment malocclusion status (87%), oral hygiene status (78%), and presence of third molars (63%) were reported to be the most important factors in determining the type of retainer. Bonded retainers, either alone (29% in maxilla and 34% in mandible) or supplemented with vacuum-formed retainers (27% in maxilla and 32% in mandible) were the most commonly used type of retainer. The preference for lifelong retention varied from 7% to 19%. Female orthodontists scheduled the first appointment after debonding sooner than male orthodontists (p<0.05). Orthodontists working in universities scheduled first appointments later than orthodontists working in private practices (p<0.05). CONCLUSION: Turkish orthodontists still give importance to the third molars in their retention protocols, contrary to what is suggested in the current literature, and lifetime retention is rarely preferred as compared to other countries.